QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 58
Function
Second level Sub-Screen / Description
SCC
Configuration>
SCC SD Card Support
(D27:F0)>
SCC card support
[Enabled, Disabled]
SCC eMMC Support
(D28:F0)>
SCC eMMC Support
[Enabled, Disabled]
eMMC Max Speed>
Selects the eMMC max. speed allowed
[HS400, HS200, DDR50]
USB
Configuration>
USB Port Disable
Override>
Selectively enables or disables the corresponding USB port
from reporting a device connection to the controller.
[Enable, Disable]
xDCI Support>
XDCI
[Enable, Disable]
xHCI Disable
Compliance Mode>
xHCI Disable Compliance Mode
[FALSE, TRUE]
USB HW Mode AFE
Comparators>
USB HW mode AFE comparators
[Enabled, Disabled]
Miscellaneous
Configuration>
State After G3>
Specifies the state to go to if power is reapplied after power
failure (G3 state)
S0 state: system boots directly as soon as power is applied.
S5 state: system remains in power-off states until the power
button is pressed.
[S0 State, S5 State]
Power Button
Debounce Mode>
Enable interrupt when PWRBTN# is asserted
[Enable, Disable]
Wake On LAN>
Wake on LAN
[Enable, Disable]
BIOS Lock>
Enable/Disable the SC BIOS Lock Enable feature. Required to be
enabled to ensure SMM protection of flash
[Enabled, Disabled]
RTC Lock>
Enable will lock bytes 38h-3Fh in the lower/upper 128-byte
bank of RTC RAM
[Enabled, Disabled]
TCO Lock>
Enable TCO and Lock Down TCO
[Enabled, Disabled]
DCI Enable
(HDCIEN)>
If enabled the user is considered to have consented to enable
DCI and allows debug over the USB 3 interface.
If disabled, the host controller does not enable the DCI feature.
[Enabled, Disabled]
DCI Auto Detect
Enable>
If set, DCI Auto detects if DCI is connected during BIOS post time
and enables DCI. If not set, DCI is disabled.
[Enabled, Disabled]
GPIO Lock>
Enable to set GPIO Pad Configuration Lock for security
[Enabled, Disabled]
