QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 62
9.2.5.
Boot Setup Menu
The Boot Setup menu lists the dynamically generated boot-device priority order.
Figure 20: Boot Setup Menu Initial Screen
The following table shows the Boot set up sub-screens and functions and describes the content. Default settings are
in bold.
Table 24: Boot Setup Menu Sub-screens and Functions
Function
Description
Setup Prompt Timeout>
Displays number of seconds that the firmware waits for setup activation key
The value 65535(0xFFFF) means an indefinite wait.
Bootup NumLock State>
Selects keyboard NumLock state
[ON, OFF]
Quiet Boot>
Quiet Boot
[Enabled, Disabled]
Boot Option #>
Sets the system boot order
Fast Boot>
Enables or disables FastBoot features
Note: Most probes are skipped to reduce time and cost during boot.
[Enabled, Disabled]
SATA Support>
SATA Support
[Last Boot HDD only, All Sata Devices]
VGA Support>
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be
shown during post. Efi driver will still be installed with EFI OS.
[Auto, EFI Driver]
USB Support>
If disabled, all USB devices will NOT be available untill after OS boot. If Partial
Initial, USB Mass Storage and specific USB port/device will NOT be available
before OS boot. If Full Initial, all USB devices will be available in OS and Post.
[Full Initial, Partial Initial, Disable]
