QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 60
Table 23: Security Setup Menu Sub-screens and Functions
Function
Description
Setup Administrator
Password>
Sets administrator password
User Password>
Sets user password
HDD Security Configuration>
Read Only Information
Allows access to set, modify and clear Hard Disk user and master passwords.
User Passwords need to be installed for Enabling Security. Master Password
can be modified only when successfully unlocked with the Master Password
in Post. If the ‘Set HDD Password’ is grayed out, then power cycle to enable
the option again.
HDD Password Configuration
Security supported : Yes
Security Enabled : No
Security Locked : No
Security Frozen : No
HDD User Pwd Status : Not Installed
HDD Master Pwd Status : Installed
Set User
Password>
Set User
Password>
(continued)
Sets HDD password.
Note: It is advisable to power cycle the system after
setting Hard Disk passwords. The ‘Discarding or Saving
Changes’ in the setup does not have an impact on HDD
when the password is set or removed.
If the setup HDD user Password is grayed out, do power
cycle enable the option again.
Secure Boot>
System Mode>
Read only information.
Secure Boot>
Vendor Keys>
Attempt Secure
Boot>
Secure Boot activated when Platform Key (PK) is
enrolled, System mode is User/Deployed, and CSM
function is disabled
[Enabled, Disabled]
Secure Boot
Mode>
Set UEFI Secure Boot Mode to STANDARD mode or
CUSTOM mode
[Standard, Customized]
Key
Management>
Enables expert users to modify Secure Boot Policy
variables without full authentication
Provision
Factory Default
keys>
Allow to provision factory default
Secure Boot keys when System is in
Setup Mode
[Enabled, Disabled]
Install Factory
Default keys>
Force System to User Mode – install
all Factory Default keys
Enroll Efi
Image>
Allow the image to run in Secure Boot
mode. Enroll SHA256 Hash Certificate
of the Image into Authorized
