QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 43
Sub-Screen
Function
Second level Sub-Screen / Description
USB Configuration>
Read only fields
USB Configuration, UBS module Version, USB controllers, and USB devices
Legacy USB
Support>
Enable- supports legacy USB
Auto– disables legacy support, if no USB devices are connected
Disable-keeps USB devices available for EFI applications only
[Enabled, Disabled, Auto]
XHCI Hand-off>
XHCI ownership change claimed by XHCI driver.
Note: This is a work around for OS(s) without XHCI hand-off support.
[Enabled, Disabled]
USB Mass
Storage Driver
Support>
Enables or disables USB mass storage driver support
[Enabled, Disabled]
USB Transfer
Time-out>
Displays timeout value for control, bulk and interrupt transfers
[1 sec, 5 sec, 10 sec, 20 sec]
Device Reset
Time-out>
Displays USB mass storage device start unit command time-out
[10 sec, 20 sec, 30 sec, 40 sec]
Device Power-up
Delay>
Displays maximum time taken for the device to report itself to the
host properly. Auto uses the default :root port 100 ms /hub port delay
is taken from hub port descriptor.
[Auto, Manual]
Mass Storage
Devices>
Mass storage device emulation type
[Auto, Floppy, Forced FDD, Hard Disk, CD-ROM]
Security
Configuration>
TXE HMRFPO>
TXE HMRFPO
[Enabled, Disabled]
TXE EOP
Message>
Send EOP Message before enter OS
[Enabled, Disabled]
LVDS
Configuration>
LVDS Flat Panel
Display Support>
Enables or disables the LVDS Flat Panel Display Support
[Enabled, Disabled]
Hardware Monitor>
CPU
Temperature>
Read only field
CPU temperature (°C)
PCB
Temperature>
Read only field
PCB temperature (°C)
Module
Temperature>
Read only field
Module temperature (°C)
Module Voltage>
Read only field
Module voltage (V)
RTC Voltage>
Read only field
RTC Voltage (V)
DDR Voltage>
Read only field
DDR Voltage (V)
Input Voltage>
Read only field
Input Voltage (V)
System Fan –
Fan Pulse>
Displays number of pulses the fan produces during one revolution.
(Range: 1-4)
System Fan -
Control Mode>
Sets System Fan Control mode
[Manual, SMART FAN IV]
