COMe-bKL6 – User Guide Rev.1.2
www.kontron.com
// 70
Sub-Screen
Function
Second level Sub-Screen / Description
Trusted
Computing>
(continued)
Pending
Operation>
Schedules operation for Security Device Note: Computer reboots on restart
in order to change the state of the security device.
[None, TPM Clear]
Platform
Hierarchy>
Platform Hierarchy
[Enabled, Disabled]
Storage
Hierarchy>
Storage Hierarchy
[Enabled, Disabled]
Endorsement
Hierarchy>
Endorsement Hierarchy
[Enabled, Disabled]
TPM2.0 UEFI
Spec Version>
Selects TCG2 Spec Version support.
TCG_1_2 is compatible mode for Win8/Win10 and
TCG_2 supports TCG2 pr event format Win 10 or later.
[TCG_1_2, TCG_2]
Physical
Presence Spec
Version>
Select to tell OS to support either PPI Spec 1.2 or 1.3
Note: Some HCK tests might not support 1.3.
[1.2, 1.3]
TPM 20
InterfaceType>
Read only field
[TIS]
Device Select>
BIOS support for security devices. Auto supports both TPM 1.2 and TPM
2.0. TPM 1.2 restricts support to TPM 1.2 devices and TPM 2.0 restricts
support to TPM 2.0. devices.
[TPM 1.2, TPM 2.0, Auto]
ACPI settings>
Enable ACPI
Auto
Configuration>
Enables or disables BIOS ACPI auto configuration. If enabled, the system
uses generic ACPI settings that may not fit the system best.
[Enabled, Disabled]
Enable
Hibernation>
Enables or disables systems ability to hibernate (OS/S4 Sleep State)
This option may not be effective with some operating systems.
[Enabled, Disabled]
ACPI Sleep
State>
Selects highest ACPI sleep state that the system enters when SUSPEND
button is pressed
[Suspend Disabled, S3 (Suspend to Ram)]
Lock Legacy
Resources>
Enables or disable lock of legacy resources
[Enabled, Disabled]
S3 Video
Repost>
Enables or disables S3 video repost
[Enabled, Disabled]
Miscellaneous>
Watchdog>
Auto
Reload>
Enables automatic reload of watchdog timers on timeout
[Enabled, Disabled]
Global
Lock>
Enable sets all Watchdog registers (except for WD_KICK) to
read only, until board is reset. [Enabled, Disabled]
Stage 1
Mode>
Selects action for this Watchdog stage
[Disabled, Reset, NMI, SCI, Delay, WDT Signal only]
Additional Information two-staged watchdog
Programmable stages to trigger different actions - If one stage is disabled, then the next stage
is also disabled.
Common actions for a watchdog trigger events ‘Delay’, ‘Reset’ and ‘Watchdog signal only’
CPLD code allows for triggering NMI or SCI. This needs programming of a predefined action
