COMe-bKL6 – User Guide Rev.1.2
www.kontron.com
// 68
Sub-Screen
Function
Second level Sub-Screen / Description
Power and
Performance>
(continued)
CPU Power
management
Control>
(continued)
Enhanced C-
state>
Enables or disables C1E. If enabled CPU switches to
minimum speed when all cores enter C-state.
[Enabled, Disabled]
Packaged C-
state Limit>
Maximum Package C-State limit setting.
Default: leaves the factory default value.
Auto initializes to deepest available package c-state
limit.
[Auto, CPU Default, C10, C9, C8, C7S, C7, C6, C3, C2, C0/C1]
Thermal
Monitor>
Enable/disable thermal monitor
[Enabled, Disabled]
GT Power
management
Control>
RC6 (Render
standby)>
Check to enable render standby support.
[Enabled, Disabled]
Maximum GT
Frequency>
Maximum GT frequency limited by user.
Choose from range 350 MHz (RPN) to 1000 MHz (RPO).
Out of range values are clipped to the minimum and
maximum range values above.
[Default Max Frequency, 100 MHz, – 1200 MHz]
PCH-FW
Configuration>
Read only fields
ME FW Version, ME Firmware Mode, ME Firmware SKU, ME File System Integrity Value,
ME Firmware Status 1, ME Firmware Status 2, NFC Support and ME State.
ME State>
If disabled, ME enters ME temporarily disabled mode.
[Enabled, Disabled]
ME Unconfig ON
RTC Clear>
If disabled, ME is not unconfigured on RTC clear.
[Enabled, Disabled]
Comms Hub
Support>
Support for Comms hub
[Enabled, Disabled]
JHI Support>
Enables or disables Intel® DAL Host Interface Service (JHI)
[Enabled, Disabled]
Core BIOS Done
Message>
Enables or disables core BIOS done message sent to ME
[Enabled, Disabled]
Firmware
Update
Configuration>
ME FW Image
Re-Flash>
Enables or disables ME FW Image RE-Flash function
[Enabled, Disabled]
Local FW
Update>
Read only field
[Enabled]
Thermal
Configuration>
CPU Thermal
Configuration>
DTS SMM>
ACPI thermal management uses either HWM reported
values when disabled or DTS SMM mechanism to obtain
CPU temperatures values when enabled.
Note: enabling DTS might deteriorate the system’s real
time behavior through handling the necessary SMMs.
[Enabled, Disabled, Critical Temp Reporting]
Tcc Activation
Offset>
Displays the offset from the factory TCC (Thermal
Control Circuit) activation temperature.
Note: this values is subtracted from the TCC threshold,
i.e. ‘0’ means maximum allowed temperature.
[0]
ACPI T-states>
ACPI T-States
[Enabled , Disabled]
