Kontron COMe-bKL6, User Manual

Page: 50 / 95

COMe-bKL6 – User Guide Rev.1.2
www.kontron.com // 50
Pin COMe Signal Description Type Termination Comment
A38 USB_6_7_OC# USB overcurrent indicator port 6/7 I-3.3 PU 10 k
Ω,
3.3 V
(S5)
A39 USB4- USB 2.0 data differential pair port 4 DP-I/O
PD 14.25 k
Ω
to
24.8 k
Ω
in PCH
A40 USB4+
A41 GND Power ground PWR GND
A42 USB2- USB 2.0 data differential pair port 2 DP-I/O PD 14.25 k
Ω
to
24.8 k
Ω
in PCH
A43 USB2+
A44 USB_2_3_OC# USB overcurrent indicator port 2/3 I-3.3 PU 10 k
Ω
3.3 V
(S5)
An open drain driver from
a USB current monitor on
the Carrier Board may
drive this line low. Do not
pull this line high on the
Carrier Board.
A45 USB0- USB 2.0 data differential pairs port 0 DP-I/O
PD 14.25 k
Ω
to
24.8 k
Ω
in PCH
A46 USB0+
A47 VCC_RTC Real Time Clock (RTC) circuit power input PWR 3V Voltage 2.8 V to 3.47 V
A48 EXCD0_PERST# ExpressCard reset port 0 O-3.3
PD 10 k
Ω
A49 EXCD0_CPPE# ExpressCard capable card request port 0 I-3.3
PU 10 k
Ω
3.3 V
(S0)
A50 LPC_SERIRQ Serial interrupt request I/OD-3.3
PU 8.2 k
Ω,
3.3 V
(S0)
A51 GND Power ground PWR GND
A52 P PCI Express transmit lane 5 DP-O
A53 PCIE_TX5-
A54 GPI0 General purpose input 0 I-3.3
PU 100 k
Ω
, 3.3 V
(S0)
A55 P PCI Express transmit lane 4 DP-O
A56 PCIE_TX4-
A57 GND Power ground PWR GND
A58 P PCI Express transmit lane 3 DP-O
A59 PCIE_TX3-
A60 GND Power Ground PWR GND
A61 P PCI Express transmit lane 2 DP-O
A62 PCIE_TX2-
A63 GPI1 General purpose input 1 I-3.3 PU 100 k
Ω
, 3.3 V
(S0)
A64 P PCI Express transmit lane 1 DP-O
A65 PCIE_TX1-
A66 GND Power ground PWR GND
A67 GPI2 General purpose input 2 I-3.3 PU 100 k
Ω
, 3.3 V
(S0)
A68 P PCI Express transmit lane 0 DP-O
A69 PCIE_TX0-
A70 GND Power ground PWR GND
A71 LVDS channel A DAT0 or EDP Lane 2 transmit DP-O
A72 LVDS_A0-
A73 LVDS channel A DAT1 or EDP Lane 1 transmit DP-O
A74 LVDS_A1-
A75 LVDS channel A DAT2 or EDP Lane 0 transmit DP-O
A76 LVDS_A2-
A77 LVDS_VDD_EN LVDS or EDP panel power control O-3.3
PD 100 k
Ω
A78 LVDS channel A DAT3 transmit DP-O
A79 LVDS_A3-