COMe-bKL6 – User Guide Rev.1.2
www.kontron.com
// 84
Function
Second level Sub-Screen / Description
SATA and RST
Configuration>
(continued)
Serial ATA Port 0 or
Serial ATA Port 1 or
Serial ATA Port 2 or
Serial ATA Port 3
(continued)
Hot Plug>
Designates port as Hot plug
[Enabled, Disabled]
Configured as eSATA> Read only field
Spin Up Device>
If enabled staggered spin-up is
performed and only drives with this
option enabled will spin up at boot.
Otherwise all drives spin up at boot spin
up device.
[Enabled, Disabled]
SATA Device Type>
Identifies if SATA port is connected to a
solid-state drive or hard disk drive.
[Hard Disk Drive, Solid State Drive]
Topology>
Identify the SATA Topology
[Unknown, ISATA, Direct Connect, FLEX,
M2]
SATA Port# DevSlp>
SATA Port# DevSlp
[Enabled, Disabled]
DITO Configuration>
DITO configuration
[Enabled, Disabled]
DITO Value>
Read only field
[625]
DM Value>
Read only field
[15]
USB
Configuration>
XHCI Disable
Compliance Mode>
Option to disable compliance mode Default is false and
compliance mode is not disabled. True disables compliance mode
[False, True]
xDCI Support>
xDCI (USB OTG device)
[Enabled, Disabled]
USB Port Disable
Override>
Selectively enables or disables the corresponding USB port from
reporting a device connection to the controller
[Disabled, Select Per-Pin]
Security
Configuration>
RTC Lock>
Enable locks bytes 38h-3Fh in lower/upper 128 byte bank of RTC
RAM
[Enabled, Disabled]
BIOS Lock>
Enables or disables PCH BIOS lock enable feature. Required to be
enabled to ensure SMM protection of flash.
[Enabled, Disabled]
HD Audio
Configuration>
HD Audio>
Controls detection of the HD-Audio device
Auto enables HD if present or disables if not present otherwise
HD Audio is unconditionally enabled or disabled
[Enabled, Disabled, Auto]
Audio DSP>
Enables or disables audio DSP
[Enabled, Disabled]
