COMe-bKL6 – User Guide Rev.1.2
www.kontron.com
// 77
Function
Second level Sub-Screen / Description
Graphics
Configuration >
(continued)
Internal Graphics>
To keep IGFX enabled, based on setup options
[Auto, Enabled, Disabled]
GTT Size>
Select GTT size
[2 MB, 4 MB, 8 MB]
Aperture Size>
Select Aperture size. Note: above 4GB MMIO, BIOS assignment is
automatically enabled when selecting 2048 MB aperture.
Note:To use this feature disable CSM support.
[128 MB, 256 MB, 512 MB, 1024 MB, 2048 MB]
DVMT
Pre-Allocated>
Select DVMT 5.0 pre-allocated (fixed) graphics memory size used by
internal graphics device.
[0 M, 32 M, 64 M, 4 M, 8 M, 12 M, 16 M 20 M 24 M, 28 M 32 M/F7, 36 M,
40 M, 44 M, 48 M, 52 M 56 M 60 M]
DVMT Total Gfx
Mem>
Select DVMT 5.0 graphics memory size used by internal graphics device
[256M, 128M, MAX.]
Gfx Low Power
Mode>
Used for SFF only
[Enabled, Disabled]
VDD Enable>
Enables or disables VDD forcing in BIOS
[Enabled, Disabled]
HDCP Support>
HDCP provisioning BIOS support
[Enabled, Disabled]
Algorithm>
HDCP re-encryption flow
[One-time, Periodic]
PM Support>
Enables or disables PM support
[Enabled, Disabled]
PAVP Enable>
Enables or disables PAVP
[Enabled, Disabled]
Cdynmax Clamping
Enable>
Enables or disabled cdynmax clamping
[Enabled, Disabled]
Cd Clock Frequency> Select highest Cd clock frequency supported by platform
[337.5 MHz, 450 MHz, 540 MHz, 675 MHz]
IGD Configuration>
Read Only field
LVS EEPROM data, Data format, Resolution; Colour depth, and Channel
count. Note : Optionally visible if a LVS display is use in auto mode or if
LFP has been set manually
IGD- Boot Type>
Selects the video device activated during post.
If external graphics are present, this has no
effect.
[Auto, EFP, LFP, EFP3, EFP2]
LFP Panel Type>
Selects panel type connected to eDP port as
native eDP or LVDS via a bridge. Note: Depends on
hardware option of the module.
[LVDS, eDP ]
Backlight Control>
Backlight control settings options
[None external, PWM, PWM Inverted, I2C]
