Konica Minolta PCL-400, User Manual

Page: 69 / 357

3-10
3
Type in the administrator access code, and then press the [OK] key.
– The manufacturer’s default setting is “000000”.
– If the code was incorrectly entered, press the [Clear/Stop] key to erase the
number, and then type it in correctly.
4
Press the [
,
] or [
+
] key until “NETWORK SETTING” is selected, and then
press the [OK] key.
– If fax kit FAX-4000 is installed
5
In the “NETWORK SETTING” menu, press the [
,
] or [
+
] key until “IP AD-
DRESS SETTING” is selected, and then press the [OK] key.