Konica Minolta PCL-400, User Manual

Page: 170 / 357

7-37
5
In the “LDAP SETTING” menu, press the [
+
] or [
,
] key until “LDAP SERV-
ER ADDR.” is selected, and then press the [OK] key.
6
Type in the IP address or host name for the LDAP server.
– The host name can contain a maximum of 64 characters.
– To specify a host name for the LDAP server, the DNS setting must be spec-
ified.
– For the IP address or host name of the LDAP server, consult with the net-
work administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to erase it,
and then type it in correctly.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu ap-
pears again.
Specifying the LDAP port number
1
In the “LDAP SETTING” menu, press the [
+
] or [
,
] key until “LDAP PORT
NO.” is selected, and then press the [OK] key.