Konica Minolta PCL-400 User Manual Download Page 203

Page: 203 / 357

8-20

The destination is displayed.

Press the [OK] key.

After the message “REGISTERED” appears, the “DIAL REGISTRATION”
menu appears again.

Note

If an edited one-touch dial destination is registered with a group dial destination,
the following screen appears.

Press the [

] or [

] key until “YES” or “NO” is selected, and then press the

[OK] key.

Whether “YES” or “NO” is selected, the message “REGISTERED” appears, and
then the “DIAL REGISTRATION” menu appears again.

Editing or deleting a speed dial destination

Press the [Utility] key in the control panel.

Summary of Contents for PCL-400






































































































































































































































































































































































Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands

Konica Minolta PCL-400, User Manual

Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands