Konica Minolta PCL-400, User Manual

Page: 65 / 357

3-6
LPR/PORT9100 printing
1
Connect the network cable. (Refer to “Connecting to a local area network
(LAN)” on page 1-12.)
2
From the machine’s control panel, specify the IP address, subnet mask and de-
fault gateway. (Refer to “Specifying an IP address” on page 3-9.)
3
Print the settings information, and then check the settings. (Refer to “Printing
the settings information” on page 3-13.)
4
Install the printer driver.
– For details on installing the PCL driver, refer to “Installing the printer driv-
er by using the AutoRun Installation” on page 2-15.
– If the GDI driver is to be installed, refer to the User’s Guide for the GDI
printer controller, included with this machine.
5
Add the network port to the computer. (Refer to “Connecting the computer and
this machine over a network” on page 3-15.)