manualshive.com logo in svg

Konica Minolta PCL-400, User Manual

Share
Download
Konica Minolta PCL-400 User Manual Download Page 341

11-70

2

Reminder 

To change the settings on the Network tab, click the [Apply] button, and then, af-
ter “Updated Successful” appears, click the [Reset] button on the page that ap-
pears after clicking “NIC and Printer Controller Reset” in the menu under 
“Maintenance” on the System tab; otherwise, the changes to the settings will not 
be applied.

“vnd.hp-pcl” under “Document Format Supported” can be used only if the im-
age controller PCL-4000 is installed.

Operations Support-
ed

Select the print operations supported by IPP.

Document Format 
Supported

Select the formats supported by IPP.

Document Format

Select the format used by IPP.

Message from Oper-
ator

Type in the message from the administrator. (maximum 127 characters)

job-k-octets-support-
ed

The setting is only displayed.

Item

Description

Summary of Contents for PCL-400






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands