Konica Minolta PCL-400, User Manual

Page: 236 / 357

9-27
3
Press the [
*
] or [
)
] key to adjust the density.
4
When the [OK] key is pressed, the message “ACCEPTED” appears, and then
the Scan mode screen appears again with the adjusted density setting indicated.
– If the density setting is adjusted to the left, the setting on the left side is in-
dicated in the Scan mode screen. If the density setting is adjusted to the
right, the setting on the right side is indicated in the Scan mode screen.
2
Note
The manufacturer’s default setting is the middle setting.