Konica Minolta IC-304 Plus, Service Manual, Page: 62 / 148

46 Chapter 2—Reinstalling the IC-304 Print Controller Software
To initialize the disks:
1. In the Disk Management widow, right-click the Disk 1 area, and select Initialize
Disk .
2. Verify that both image disk check boxes are selected, and click OK .
3. Verify that the Computer Management window appears similar to the following
window.
4. Proceed to Converting the Disks to Dynamic Disks .
Converting the Disks to Dynamic Disks
1. In the Disk Management window, right-click in the Disk 0 area.