Konica Minolta IC-304 Plus, Service Manual, Page: 133 / 148

117
3. Remove the side cover. See Removing the Side Cover on page 93.
4. Remove the FusionIN board to gain access to the battery.
5. Remove the battery:
a. Use one fingernail to press the top of the battery clip away from the battery.
The battery pops up when released.
b. Use your thumb and index finger to lift the battery from the socket.
c. Ensure that the battery clip is touching the base of the battery socket by
pressing gently on the clip.
Figure 31: Removing the battery
Installing the Battery
1. Tilt the battery so that you can insert it into the socket on the side opposite the
battery clip.
2. Press the battery down into the socket until it clicks into place. Ensure that the
battery clip holds the battery securely.
Figure 32: Inserting the new battery
3. Return any adapters that you removed.
4. Return the side cover. See Returning the Side Cover on page 94.
5. Reconnect all external cables and power cords, and turn on the server
CAUTION: Replacing the battery may cause the configuration to be modified.
Verify that the computer BIOS is configured by performing the procedures in
Configuring the Computer BIOS on page 65.