Konica Minolta IC-304 Plus, Service Manual, Page: 21 / 148

5
1.2 Installing the Windows XP Professional Operating
System
After turning on the IC-304 print controller for the first time, the system
automatically performs disk striping, and the following message appears.
¾
Click OK .
The Configuration Wizard appears.
1.3 Configuration Wizard (First-time Software Setup)
The first-time software setup is performed using the Configuration Wizard.
1.3.1 Choosing the Configuration Type
¾
Verify that First time Configuration is selected, and click Next .
Note: During the configuration process, when prompted to restart your
computer, click No . At the end of the Configuration Wizard, you will be
prompted to restart your system.