Konica Minolta IC-304 Plus, Service Manual, Page: 41 / 148

25
5. Make sure the Novell Client for Windows check box is selected, and then click
the Uninstall button.
6. Click Yes twice.
The IC-304 print controller restarts.
You have completed uninstalling Novel Client software for the IC-304 print
controller.
1.6 Performing a Test Print
To import a file and perform a test print:
1. From the File menu select Import .
2. Locate one of the following files:
•
CyclingTour_Letter.pdf in the D:\Sample_Files\USA\General folder
•
CyclingTour_A4 .pdf in the D:\Sample_Files\Europe\General folder
3. Double-click the file to add it to the list for importing.
4. Select the ProcessPrint virtual printer.
5. Click Import .
The file is processed, printed, and sent to the Storage window.
Note: If the job is not printed or is waiting in the
Print Queue
, check that the
finishing device is set properly in the
Finishing
options of the Job Parameters
window.
1.7 Backing up the IC-304 Print Controller System
A backup of the operating system should be performed after the system
configuration is completed.
The IC-304 print controller enables you to back up only partition C or the entire
system (partitions C and D ).
You can back up a system partition at any time. When you back up a partition,
Symantec Norton Ghost™ software copies the files on partition
C to an image file on
partition D . When you back up the entire system (partitions C and D ), Norton Ghost
software copies the files to a DVD.
When backing up the operating system, make sure that you have a sufficient
amount of blank DVD-R media available.
Tip: It is recommended that you delete unnecessary files, such as temporary
files, before performing the backup procedure.
Note: If you are already logged on to your system and the IC-304 print
controller workspace is open, exit the workspace, insert DVD #1 into the DVD-
RW drive, and proceed to step 4.