Konica Minolta IC-304 Plus, Service Manual, Page: 121 / 148

105
9. Lift the system board up and out of the server.
10. Turn over the system board and remove the metal bracket from the board. Set
aside the bracket to install on the new system board.
4.6.4 Installing a New System Board
1. Review Safety Information (Multi-Language) on page ix.
2. Verify that the IC-304 print controller is turned off and that all power cords and
external cables are disconnected.
3. Touch the antistatic package containing the new system board to any
unpainted
metal surface on the server, then remove the system board from the
package and place it on the worktable.
4. Turn over the system board.
5. Attach the metal bracket to the system board.
Attention: When you handle electrostatic discharge (ESD) sensitive devices,
take precautions to avoid damage from static electricity.
Note: The new system board includes a new black plastic CPU load plate,
which you can discard.
Note: The IC-304 print controller is supplied with a reusable metal bracket
attached to the underside of the system board. The metal bracket is part of
the CPU cooling kit (Creo part number 609-00426).