Konica Minolta IC-304 Plus, Service Manual, Page: 10 / 148

x IKON PowerPro 650 server 1.0 Technical Manual
Safety Precautions
The following sections contain safety information regarding avoiding personal
injury, before and while servicing the IC-304 print controller.
General Safety
Follow these rules to ensure general safety:
•
Lift up the IC-304 print controller using the handle and not using the front panel.
Lifting it up using the front panel may result in major injury.
•
Before opening the IC-304 print controller covers, ensure that the unit has been
switched off.
Switching off, only the ON/OFF power button, will leave some circuits
energized. For complete disconnection from the supply, the main power cable
must also be disconnected from the power source.
Battery Replacement
•
Only qualified service personnel should replace the battery.
•
Handle and dispose of the used batteries according to Lithium battery
manufacturer’s instructions.
Static Electricity
When handling static-sensitive electrical devices (such as: electronic boards, disk
drives, or memory modules):
•
Use a field service grounding kit (chain, mat, and wrist strap).
•
After removing the component from the system or from its protective wrapper,
place it on a grounded anti-static mat and not on a carpet or any other
unshielded surface.
•
After removing a board from a station, store it in an anti-static bag.