Konica Minolta IC-304 Plus, Service Manual, Page: 135 / 148

119
4.7.2 Installing the DVD-RW Drive
1. Install the tab strips to the new DVD-RW drive that you removed from the old
DVD-RW drive. See Figure 34.
2. Slide the DVD-RW drive into the DVD-RW drive cage, making sure that the
drive locks into place.
3. Reconnect the cables to the DVD-RW drive.
4. Return the side cover. See Returning the Side Cover on page 94.
5. Reconnect all external cables and power cords, and turn on the server.
4.8 Removing and Installing a Hard Disk Drive
Perform the following procedures to remove and install the three hard disk drives.
4.8.1 Removing a Hard Disk Drive
1. Turn off the IC-304 print controller and all peripheral devices. Disconnect all
external cables and power cords.
2. Remove the side cover. See Removing the Side Cover on page 93.
3. Disconnect the SATA2, data, and power cables from all the hard disks.
4. Remove the three screws that secure the drive cage to the server chassis.
Attention:
System disk: Before replacing or formatting the system disk, ensure that you
have made a note of the computer name, TCP/IP information (for example
DHCP = Yes), and OEM
Windows XP Professional Product ID#. Back up folders
or jobs in
C
and
D
partitions to an external device or network.
Image disks: Before replacing an image disk, ensure that you back up all jobs (such
as:
PostScript , High-Res, Variable Print Specification, and PDF jobs) to an external
device or network.
Tip: You may find it easier to work if you lay the server on its side.