Konica Minolta IC-304 Plus, Service Manual, Page: 134 / 148

118 Chapter 4—Hardware and Maintenance Repairs
4.7 Removing and Installing the DVD-RW Drive
Perform the following procedures to remove and install the DVD-RW drive.
Figure 33: Bay1 DVD-RW drive
4.7.1 Removing the DVD-RW Drive
1. Review Safety Information (Multi-Language) on page ix.
2. Turn off the IC-304 print controller and peripheral devices. Disconnect all
power cords and external cables.
3. Remove the side cover. See Removing and Replacing the Side Cover and Front
Panel on page 93.
4. Disconnect the cables connected to the DVD-RW.
5. Press the retaining tabs that hold the DVD-RW drive, then gently slide the drive
toward the front of the server and remove the drive.
6. Remove the tab strips from both sides of the DVD-RW drive using a cross-head
screwdriver and retain them for future use.
Figure 34: Tab strips on the DVD-RW drive
Retaining tab (on
each side)
Tab strip (one on each side)