manualshive.com logo in svg

Konica Minolta IC-304 Plus, Service Manual, Page: 32 / 148

Share
Download
Konica Minolta IC-304 Plus Service Manual Download Page 32

16

Chapter 1—First Time Setup and Configuration

 

After restarting, the IC-304 print controller software splash screen appears.

4. The IC-304 print controller software is automatically loaded and launched.

You have completed First Time Setup and Configuration. 

1.4

Configuring McAfee VirusScan

The current recommended virus protection software is McAfee VirusScan® 
software Enterprise version 8.0.0. After installing VirusScan software, perform the 
following configuration procedures. 

We will continue to update our virus protection software recommendations 
according to software performance and market availability.

Once a year, it is the responsibility of the site manager to obtain the latest version of 
the antivirus software and installation procedure. The site manager must also 
regularly download the latest antivirus definitions from the relevant Internet site.

Important:  

Running VirusScan software could slow down process time and 

affect the overall performance of the server.

VirusScan software version 8.0.0 is supported on Windows 2000 and 
Windows XP operating systems only. Use an earlier version of the software 
with an earlier version of the operating system.

Note:  

The following VirusScan software configuration procedure is subject to 

change without notice and the relevant documentation will not be updated.

Summary of Contents for IC-304 Plus





















































































































































Reviews:

No comments