manualshive.com logo in svg

Konica Minolta IC-304 Plus, Service Manual, Page: 103 / 148

Share
Download
Konica Minolta IC-304 Plus Service Manual Download Page 103

87

3.

Restart the IC-304 print controller software.

4. Recreate the problem you have encountered and then click the 

STOP

 button.

The IC-304 print controller software closes automatically and the log files are 
saved as a 

Data_logs.cab

 file in 

D:\ Shared

, or in the location previously 

specified in step 2.

Sending the Data Logs

¾

Send the 

Data_logs.cab

 file to your your service representative.

3.4.12 Formatting the Image Disk

Perform the following procedure when suggested as a recovery action.

1.

Close all software programs and wait for them to shut down completely.

2.

From the Windows 

Start

 menu, select 

IC-304 > IC-304 Tools > Format Image 

Disks

.

3.

Close all open windows, if required, and click 

OK

.

4. Click 

OK

.

Important:  

Formatting erases all data stored in the Storage folder. It is 

recommended to back up your data, if possible, to an external device or 
network.

Summary of Contents for IC-304 Plus





















































































































































Reviews:

No comments