Konica Minolta CM-23d, Instruction Manual

Page: 92 / 151

89
„
Observation Condition Settings
To set observation conditions, select “Observer/Illuminant” from the <Measurement cond.> menu screen.
The following two observer/illuminant settings can be configured for the observation conditions.
• Observer/Illuminant 1: Select the observer/illuminant used to measure the colorimetric value.
• Observer/Illuminant 2: Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [
◀
] or [
▶
] to display the
<Measurement cond.> menu screen.
Memo
To return to the previous screen , press [MENU] or [ESC] .
2
Use [
▲
] or [
▼
] to move the cursor to “Observer/
Illuminant”, and then press the [Confirmation] key.
The <Observer/Illuminant> screen
is displayed.
3
After setting the observer/illuminant, press [ESC] to
return to the previous screen.