Konica Minolta CM-23d, Instruction Manual

Page: 110 / 151

107
„ Password Setting
The password required for changing the user type from a worker to an administrator can be configured in the
instrument setup.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Password
Setting”, and then press the [Confirmation] key.
The <Password Setting> screen
is displayed.
2
Use [
◀
]/[
▶
] or [
▲
]/[
▼
] to set the password.
Settings
8 digits (Initial value "00000000": No set password)
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Measurement setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Measurement setup> screen.