Konica Minolta CM-23d, Instruction Manual

Page: 59 / 151

56 55
Measur
ement
2
With this instrument, tolerances can be set for the color difference target of the sample to perform judgment. For
the procedure on setting tolerances, refer to P.68 “Tolerance Settings” and P.74 “Default Tolerance Settings”.
If color difference target data is deleted, neither the color difference display for the data nor the pass/fail
judgment based on the tolerances set to the data will be performed. If other color difference target data is
selected, or another color difference target is assigned to the color difference target number of the deleted data,
recalculations and pass/fail judgments will be performed.
„
Pass/Fail Judgment Based on Tolerances
If the measured color difference is outside the tolerances set for the color difference target, the value will be
highlighted in red to indicate that the judgment result is “Fail”. By setting the warning level (P.75), even if the
sample does not exceed the tolerance, that item will be highlighted with the warning color and a warning will be
issued if the sample nears the tolerance. Both maximum and minimum tolerances can be set for each color
difference target.
Pass/fail judgments based on tolerances are displayed as follows.
Notes
Before using this function, the tolerances must be set.
Pass/Fail Judgment for Color Difference