Konica Minolta CM-23d, Instruction Manual

Page: 103 / 151

100 99
Set
ting
3
„ Display Language Settings
This instrument allows the display language to be set.
Pressing and holding [MENU] while starting up the instrument also displays the language setting screen.
Memo
The language is set to “English” when the instrument is shipped from the factory.
Notes
When the backup battery of the instrument has gone dead, the display language is reset to “English”.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Language”,
and then press the
[Confirmation] key.
The <Language> screen
is displayed.
The scroll bar at the right on the <Language> screen
shows that there are additional language settings that
cannot fit on the screen.
2
Use [
▲
] or [
▼
] to move the cursor to the desired
language.
Moving the cursor past the top or bottom of the list will
show additional language settings that cannot fit on the
screen.
Settings
{ English
{ Japanese
{ German
{ French
{ Spanish
{ Italian
{ Chinese
{ Portuguese
{ Polish
{ Russian
{ Turkish
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.