Konica Minolta CM-23d, Instruction Manual

Page: 67 / 151

64 63
Measur
ement
2
„ Edit Target filter
The filter function makes searching for a target easier. The function allows only selected target data to be displayed
by selecting only saved data or by selecting a group created in advance.
Memo
The Edit Target filter is set to “OFF” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Target menu> - <Data management> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Edit Target
filter”, and then press the [Confirmation] key.
The <Edit Target filter> screen
is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the desired item.
Settings
{ OFF : All target data will be displayed.
{ only saved data : Displays only numbers for the saved
target.
{ only group : Only targets that satisfy all of the
group conditions displayed below are
displayed. Select and press the
[Confirmation] key to display the
group selection screen. With the
cursor on the group numbers, press
the
[Confirmation] key
. Using
[
▲
]
or [
▼
] to select the group number
displays the group name set for the
default group. Press the
[Confirmation] key
to confirm, and
press [OK] to return to the <Data
management>
screen.
3
Press the [Confirmation] key. (With [OFF] and [only
saved data])
The selection is confirmed and the screen returns to the
<Target> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Data management> screen.