Konica Minolta CM-23d, Instruction Manual

Page: 109 / 151

106 105
Set
ting
3
„ Auto Power Off
The amount of time before switching the power off can be set.
Memo
Auto power off is set to “30 (minutes)” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Auto power
off”, and then press the [Confirmation] key.
The <Auto power off> setting screen
is displayed.
2
Use [
▲
] or [
▼
] to change the value.
Settings
{ 00 to 60 minutes
Memo
Setting to “00” minutes will change the setting to “Do not
power off”.
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.