Konica Minolta CM-23d, Instruction Manual

Page: 78 / 151

75
„ Warning Level Setting
Memo
The warning level is set to “80%” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Setting> - <Default data setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Warning
level”, and then press the [Confirmation] key.
The <Warning level> screen
is displayed.
2
Use [
▲
] or [
▼
] to change the value.
Settings
{ 000 to 100%
3
Press the [Confirmation] key after completing the
changes.
The setting is confirmed and the screen returns to the
<Default data setup> screen .
Notes
If [ESC] is pressed during configuration, the settings will
not be changed and the screen will return to the
<Default data setup> screen.