Konica Minolta bizhub C200, User Manual

Page: 234 / 268

C200 11-15
Utility mode
11
Expert Adjustment
!
Detail
For the procedure on adjusting the color registration, refer to
"Color Registration Adjust" on
page 11-23 .
For the procedure on adjusting the gradation levels, refer to
"Gradation Adjustment" on page 11-26
.
For the procedure on adjusting the printer, refer to "Printer Adjustment" on page 11-28 .
Only "Black Image Density" is available for OHP transparencies.
Paper Size/Type Counter
Parameter Description Default Setting
AE Level Adjustment Specify the initial value for auto exposure (AE) be-
tween 0 and 4. The higher the setting, the more
that the original background is emphasized. 2
Density Ad-
justment Thick Paper Image
Density –Yellow Adjust the image density for printing on thick pa-
per or OHP transparencies. The density can be
adjusted separately for each color (yellow, ma-
genta, cyan and black for a color image and the
black image density). The higher the setting, the
darker the density.
Adjust the setting for yellow, magenta, cyan and
black between -5 and +5.
Adjust the setting for "Black Image Density" be-
tween -2 and +2. 0
Thick Paper Image
Density –Magenta 0
Thick Paper Image
Density –Cyan 0
Thick Paper Image
Density –Black 0
Black Image Den-
sity 0
Image Stabilization Perform an image stabilization if the image is in-
correct, even after the gradation levels have been
adjusted.
•
Init Stabilization:
Select when a good result was not achieved
after "Image Stabilization" was selected.
• Image Stabilization:
Perform a normal image stabilization.
Init Stabilization
Color Reg.
Adjustment Cyan Adjust the color registration if color shifts can be
seen in the print result. -
Magenta -
Yellow -
Gradation
Adjustment Copy Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on increasing the
number of images stored in the memory. -
Printer (Gradation) Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on the gradations in
images. -
Printer (Resolu-
tion) Adjust the gradation levels if there are changes in
the color gradations of the print image. The ad-
justment is made with stress on the reproducibility
of text and lines. -
Printer Ad-
justment Media adjustment If the print image is flawed (missing print, white
spots, or uneven printing) due to the characteris-
tics of the type of paper that is used, adjust this
parameter between -8 and +7 according to the
paper type. 0
Description
Store combinations of paper sizes and paper types to be counted.