manualshive.com logo in svg

Konica Minolta bizhub C200, User Manual

Share
Download
Konica Minolta bizhub C200 User Manual Download Page 227

C200

11-8

Utility mode

11

2

Note 

[Account Track Registration] appears if an account is registered and that account is logged on.

If the software switch settings have been set to use account settings in the From information for e-mail 
messages (mode 366), to use SMTP authentication (mode 380) and to not share the SMTP 
authentication user name and password with the POP3 user name and password (mode 380), [SMTP 
Authentication Password] appears.

If the software switch settings have been set to use account settings in the From information for e-mail 
messages (mode 366) and to check that data has arrived (POP3) before establishing an SMTP 
connection (mode 350), [POP3 Password] appears.

For details on the software switch settings, refer to the User's Guide [Network Administrator].

11.2.7

Displaying the User Settings screen

Follow the procedure described below to display the User Settings screen by pressing [Utility/Counter] key.

1

Press the [Utility/Counter] key.

2

Touch [User Settings].

–

If the software switch settings have been set to limit registering one-touch dial destinations (mode 
477), [One-Touch/Box Reg.] and [Print Lists] do not appear. For details on the software switch 
settings, refer to the User's Guide [Network Administrator].

–

If "Account Track" in the Authentication Settings screen has been set to "ON" and the 
[Utility/Counter] key is pressed without a user being logged on with an account, only [Admin.] 
appears.

The User Settings screen appears.

Summary of Contents for bizhub C200













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands