Konica Minolta bizhub C200, User Manual

Page: 42 / 268

C200 1-28
Before making copies
1
1.6 Loading paper into the LCT
0 If the sub power switch is turned off, even while the main power switch is on, the LCT cannot be pulled
out, even after the tray release button is pressed. Be sure that the machine is turned on with the sub
power switch.
0 LCT is an option.
1
Press the tray release button.
The LCT is unlocked and the LCT tray slides out slightly
to the front.
2
Pull out the LCT.
3
Load the paper into the right side of the LCT so that the
side of the paper to be printed on (the side facing up
when the package was unwrapped) faces up.
– To print on OHP transparencies, label sheet,
envelopes or postcards, use the tray 1 or the bypass
tray.
?
How is curled paper loaded?
% Flatten the paper before loading it.
Film
, mark