Kongsberg Seapath 320, Installation Manual, Page: 88 / 152

Seapath 320
72 M300-62/rev.2
-
Telegram out
-
Analog out
The different Types of interfaces possible are:
-
Serial
-
Net
The Direction which may be set up is In, Out and In/Out. In the Description box it is
possible to enter free text.
4.4.6.3 I/O properties
The parameters displayed in the I/O properties views are dependent on what Type of
interface is selected in the Configuration details sections.
4.4.6.3.1 Serial interface
The default view for the serial port interface is as shown in Figure 49.
Figure 49 I/O properties view when serial interface is selected
The I/O Properties view when Serial interface is selected, contains the following
parameters:
Port Serial port number. Corresponds to the number at the rear of the
Processing Unit.
Baud rate Up to 115 200 bites/second.
Electric RS-232 or RS-422.
Under the collapsible Details group box, less used properties are placed:
Parity None, Odd or Even.
Data bits 6, 7 or 8.
Stop bits 1 or 2.
4.4.6.3.2 Ethernet interface
The network parameters section specifies how the Processing Unit communicates via
the IP network.
The default view for the net interface properties is shown in Figure 50 below.