Kongsberg cJoy OT, Operator'S Manual

Page: 47 / 208

User interface
This field becomes unavailable and shows the current vessel speed if a speed
sensor is enabled.
Thruster Setup
The Thruster Enable input dialogs are used to enable and disable the vessel's thrusters,
main propulsion units and/or rudders for use by the system, and select the combinator
control for thrusters and main propulsion units that can be controlled by both pitch
and RPM.
Dialog selection
Thruster Enable input dialogs are selected and cyclically displayed in the View area of
the display by pressing the
Thruster enable button one or more times until the required
input dialog is displayed.
The sequence in which the Thruster Enable input dialogs are displayed is as follows:
• Thruster Enable
• Combinator Control
• Run in
Pressing the
Thruster enable
button when the Combinator Control input dialog is being
displayed closes the dialog.
Thruster Enable
The Thruster Enable input dialog is used to enable and disable the vessel's thrusters, main
propulsion units and/or rudders for use by the system. This input dialog, which reflects
the vessel's thruster and propulsion configuration, also shows running and ready status.
385585/C
47