3
Press the
Enter
button.
• The auto trim gain is changed to the selected value.
4
Close the Pilot Setup input dialog.
Enabling weather compensation
Weather compensation (wind forces) can be enabled and disabled. When weather
compensation is enabled, the vessel will react much more quickly to sudden changes in
wind speed and direction.
To enable weather compensation, proceed as follows:
1
Display the Pilot Setup input dialog.
2
Move the focus to the
Weather Compensation
field and change the option to
On
.
3
Press the
Enter
button.
• Autopilot weather compensation is enabled.
4
Close the Pilot Setup input dialog.
Disabling weather compensation
To disable weather compensation, proceed as follows:
1
Display the Pilot Setup input dialog.
2
Move the focus to the
Weather Compensation
field and change the option to
Off
.
3
Press the
Enter
button.
• Autopilot weather compensation is disabled.
4
Close the Pilot Setup input dialog.
Setting the autopilot Rate Of Turn
To specify the speed at which the vessel should turn during a heading change (i.e. the
vessel's Rate Of Turn), proceed as follows:
1
Display the Pilot Setup input dialog.
2
Move the focus to the
Rate Of Turn
field and change the value to the required speed.
3
Press the
Enter
button.
• The Rate Of Turn is set to the value selected.
4
Close the Pilot Setup input dialog.
Setting the maximum rudder angle for automatic heading
control
In the optional
Autopilot
mode with automatic heading control, the system will not turn
the rudders/azimuth thrusters beyond the specified limit. At high speeds, a relatively
small limit such as five degrees is often used.
385585/C
119
Summary of Contents for cJoy OT
Page 207: ...Message explanations A 86 385585 C...
Page 208: ...2015 Kongsberg Maritime...
