Kongsberg cJoy OT, Operator'S Manual

Page: 42 / 208

Kongsberg cJoy OT
Rate Of Turn
Allows you to set the Rate Of Turn for change heading operations. Within the
configured range the value can be increased and decreased in 5 degree steps (see
Setting the Rate Of Turn on page 114).
This field is not shown in the optional Autopilot mode. The Rate Of Turn for
Autopilot mode is located on the Pilot Setup input dialog (see Pilot Setup on
page 52).
Draught Type
Allows you to select the vessel draught —
Transit
,
Operational
and/or any other
vessel-specific draught (see Selecting the vessel draught on page 108).
This field is only shown if the system is configured with more than one vessel
draught.
Wind Comp.
Allows you to enable or disable (
On
or
Off
) joystick wind compensation, provided
that at least one wind sensor is enabled (see Environmental compensation on
page 110).
This field is not shown in the optional Station Keeping and Autopilot modes.
Gain Level
Allows you to select the controller gain level (
Low
,
Medium
or
High
) for the
automatic heading and automatic position control functions (see Selecting the
controller gain level on page 113).
This field is not shown in the optional Autopilot mode.
Sensors
The Sensor Enable input dialog is used to enable and disable sensors. It also shows
their availability (ready for use) status.
To display this input dialog, press the
Sensor enable
button.
42
385585/C