Kongsberg cJoy OT, Operator'S Manual

Page: 15 / 208

User interface
User interface
This section contains the following topics:
cJoy OT operator terminal ...............................................................................................15
Controls and indicators ....................................................................................................16
Display layout ..................................................................................................................21
Operational views ............................................................................................................27
Input dialogs ....................................................................................................................40
System status views and input dialogs.............................................................................56
cJoy OT operator terminal
The cJoy OT operator terminal (cJoy OT) is the main operator interface for the
stand-alone joystick system.
It is designed for manual and semi-automatic joystick operations.
Figure 5 cJoy OT operator terminal
(CD3025)
General
setup
Sensor
enable
Thruster
enable
Limits
Pilot
setup
Views
System
Day/
night
Alarms
Silence/
ack.
Stand
by
Take Give
Full
thrust
Joystick
Station
keeping
Auto
pilot
Fore
pivot
Auto
heading
Auto
surge
Auto
sway
Centre
pivot
Aft
pivot
Present
heading
power
operation
Cancel
Enter
Set
heading
+
-
Test Dim
cJoy
The operator terminal panel is delivered in two standard versions — black and grey.
The layout is divided into four main areas where controls and indicators are arranged
according to their function. For safety reasons, some of the buttons must be pressed
twice within four seconds to invoke action.
On the black standard version these buttons are indicated by a white line along the
lower edge.
385585/C
15