Service and Repair Manual
Repair
Exhaust gas system
u
Tighten screws
16
to torque.
Fig. 202: Installing distribution block and pipes
u
Insert o-ring
9
in distribution block
7
.
u
Position distribution block
7
with screws
6
on oil entry of turbocharger bracket.
u
Tighten screws
6
to torque.
u
Install and tighten flange joints
1, 8
to torque.
u
Grease orifice
12
.
u
Install pipe
10
with orifice
12
, screws
11
and seal
13
between flange joint
8
and crankcase.
u
Install pipe
2
with flange joints
1
on oil entry of turbocharger bracket.
u
Tighten screws
11
to torque.
u
Install plate
4
and clamps
3
with screws
5
.
u
Tighten screws
5
to torque.
Specific values
Not applicable.
Tightening specifications
Refer to standard tightening torques.
(For more information see: 5.3 Standard tightening torques,
KD83V16 33525088901_2_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
179
