Service and Repair Manual
Repair
Fuel system
Fig. 142: Installing injector and clamp
u
Lubricate thread and head contact surface of screw
6
with clean engine oil.
Information
Make sure the copper washer is present before installing the injector.
u
Position injector
4
with its connection upwards into sleeve
1
.
u
Install clamp
7
with screw
6
.
Fig. 143: Positioning injector and clamp
Information
Injectors can be mounted in two positions. Note that only one position is correct.
Make sure the clamp is centered between valve springs.
KD83V16 33525088901_2_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
127
