Repair
Service and Repair Manual
Exhaust aftertreatment system
Information
Make sure that dust cannot go into the system.
Fig. 295: Installing injector
u
Install the retaining plate
10
on the reactor with nuts
9
, and washers
8
.
Information
The protruding side of the retaining plate
10
should face toward the reactor.
At this stage, do not tighten the nuts
9
, so that the injector
3
can be installed.
u
Install a new gasket
7
to the new injector
3
.
u
Slide the injector
3
and gasket
7
assembly between the reactor and the retaining plate.
Information
Make sure that the gasket
7
remains in place during installation.
Make sure that the injector inlet port faces
3
downwards and overlaps the slot in the retaining
plate
10
.
258
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07
