Kohler KD83V16, Service And Repair Manual

Page: 72 / 300

Repair Service and Repair Manual
Rocker arms
Fig. 65: Position of flywheel and turning device
Fig. 66: TDC positions of cylinder A1
1 Rocker arm position in ignition TDC 2 Rocker arm position in overlap TDC
Step 1
u
Check if cylinder A1 is in TDC overlap position. If not, turn the crankshaft another 360°.
u
Verify TDC overlap position again.
Step 2
u
Rotate crankshaft in direction of rotation with turning device to index 2 .
u
Set valve clearance for cylinders A7 , A8 and B2 , B4 . (For more information see: Checking valve
clearance, page 74.) , (For more information see: Setting valve clearance, page 74.)
Step 3
u
Pass flywheel groove index 6 .
Step 4
u
Pass flywheel groove index 3 .
Step 5
u
Stop at flywheel groove index 4 .
u
Set valve clearance for cylinders A3 , A5 and B6 , B8 . (For more information see: Checking valve
clearance, page 74.) , (For more information see: Setting valve clearance, page 74.)
Step 6
u
Pass flywheel groove index 5 .
Step 7
72
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07