MDC-3560P/3510P Series
Chapter 4
INSTALLATION
93142002-02
4-3
4.6 Installation procedure
4.6.1 Installing the Transceiver Unit
When mounting the unit, position the transceiver unit as shown, so that a notched part
of the transceiver base is directed towards the aft. This arrangement simplifies cable
fitting and servicing. Also take note of the precautions detailed in paragraph 4.4.1
when you attempt to install the antenna unit.
(1) Drill four fixing holes of 14 mm diameter on the fitting surface of a radar platform,
as shown in Figure 4.1.
(2) Fit the transceiver unit on the position and fix it using the 12 mm stainless bolts
prepared as installation materials.
Figure 4.2 Details of the base fixing
Fix with four screws
Double nuts
Spring washer
Washer
M12 Hexagonal
bolt
Platform
Antenna base
Figure 4.1 Plan view of fixing holes
Unit: mm
199
(7.83 in.)
185
(7.28 in.)
(0.55 in.)
Cable
100
φ
(3.97 in.)
RA774UA
Open scanner
The Notch on the transceiver base
Ship’s Bow
Swing circle
R700 (4 ft antenna)
R1000 (6 ft antenna)
14
φ
x 4
