Koden CVS-705D, Installation Manual

Page: 35 / 74

CVS-705D/707D Chapter 1 Installation
0092607052-03 1-15
1.7 Wiring
1.7.1 Connection of cables to Display and Processor unit
Connect the power cable and cables from the transducer to the connectors on the Display and
Control unit.
Fig. 1.17 Cable connections
●Operation unit connection
Input/output
(J1)
● External synchronous
input/output
External echo sounder
(J2)
● Sona-Tone
TM
output
Line output for speaker
with amplifier
(J3)
● NMEA2 input/output
(12 V Power output)
GPS, plotter etc
(J8)
● NMEA1 input/output
GPS, plotter etc.
(J7)
● Transducer
To transducer via junction
box (JB-34)
(POWER)
● Power input
21.6 VDC to 31.2 VDC
(J6)
● via junction box (JB-34)
・
Speed sensor data input
・
Water temp. sensor data
input
(J5)
● External monitor output
Analog RGB
(J4)
● CCD camera input
*Only for CVS-707D
●External monitor output
Analog RGB*