Koden CVS-705D, Installation Manual

Page: 30 / 74

Chapter 1 Installation CVS-705D/707D
1-10 0092607052-03
1.5 Installation of Operation unit
CVS-705D/707D Operation unit can be installed either on desk-top or flush-mounted.
Install by the following procedure
.
1.5.1 Desk-top installation
(1) Decide the location to install the Operation unit and keep the space for the maintenance
works as shown in Fig. 1.12.
(2) Mark the position where installation plinth is installed. (See Fig. 1.12)
(3) Remove 4 plastic corner guard caps of the Operation unit (These can be easily pulled out
upwards)
(4) Fix the clamps to the Operation unit with the screw of 4M (4mm). Install the corner guard
caps removed in step (3).
(5) Confirm that the clamps matches the marking position. If not matches, correct the marking
position
(6) Install the clamps in the installing location (4 holes) and fix it with 4 tapping screws (4mm)
(M4 or pan-head). (Prepare 4 mm screws suitable for thickness of installing location.)
Fig. 1.11 Desk-top installation of Operation unit
Corner guard cap (4pcs)
Clamp (Right)
M4 Screw (4pcs)
M4 screw (4pcs)
Operation unit
Clamp (Left)
Unit: mm (inch)