Koden CVS-705D, Installation Manual

Page: 60 / 74

Chapter 2 Adjustment CVS-705D/707D
2-2 0092607052-03
2.1.2 Setup of type of low frequency
transducer
TD Setting
– LF TD Type
Select the type of transducer to be actually
used in low frequency. It has to be adjusted
as it has effect on images.
1. Press .
2. Select [TD Setting] - [LF TD Type].
3. Press [ ] of .
The setup box of [LF TD Type] will be
displayed.
4. P
ress [▲] and [▼] to select [TD Selection].
When a low frequency transducer is not
used, select [OFF].
5. Press of
[►] of .
When [TD Selection] is selected, the
setup box of [TD Selection] will be
displayed.
Select transducer model to be used.
When unlisted transducer is used, select
[Others1] or [Others2].
When [Others1] is selected, one
high-frequency and one low-frequency
can be set up.
When [Others2] is selected, two
high-frequencies and two low-frequencies
can be set up.
6. Press [▲] or [▼] to select the type of
transducer to use.
7. Press .
The setup box of [TD is set.] will be
displayed.
8. Select [Yes]
with [▲] and [▼] keys.
9. Press .
A
message “It is processing” will be
displayed.
And, after a while the menu will close and
display returns to [TD Setting] menu.
10. Press to close the menu.
2.2 Setup of frequency of
transducer
The high or low frequency can be setup for
transducer frequency.
When the transducer listed in the [TD
selection] is selected, [Frequency] will be set
automatically.
When [Ohter1] or [Other2] is selected,
[Frequency] should be set manually.
Therefore you need to find out the
[Frequency].
2.2.1 Setup of frequency for high
frequency transducer
TD Setting
– HF TD1 Setting
1. Press .
2. Select [TD Setting]
– [HF TD1 Setting].
3. Press [ ] of .
The setup box of [HF TD1 Setting] will be
displayed.