Koden CVS-705D, Installation Manual

Page: 71 / 74

CVS-705D/707D Chapter 3 Maintenance
0092607052-03 3-5
3. Press [ ] of .
The setup box of [System Program Load]
will be displayed.
4.
Using [▲] and [▼] keys, select [PC
Connection], [SD Card] or [USB Memory]
to be stored.
5. Press [ ] of .
The setup box of [System Program Load]
will be displayed.
6. When program is to be updated, select
[Yes] and is not to be updated, select [No]
with [▲] and [▼] keys.
7. Press .
When [Yes] is selected, program will be in
updating condition and a message
“Updating
Do not Power Off.” will be displayed.
When [No] is selected, returns to the
[System Program Load] selection box
menu.
8. The program will be downloaded from PC,
SD Card or USB Memory.
[In case of update of the program with the
personal computer]
When downloading has started, [CM] keys
will blink red in the order from CM1 to
CM6.
At completion of downloading, the both
gain knobs will light red.
[In case of update of the program with the
SD Card or the USB Memory]
At completion of downloading, “Normally
updated. Turn ON the power again.
” will
be displayed.
9. Press for about 5 seconds to switch
off the power.
Caution: When program updating
failed on the way, switch off the
power once and switch on again.
It will start up in the wait status of
downloading. Try again the
procedures from step 6 again.
Caution: Please connect or
disconnect the SD card and the
USB memory after turning off the
power supply.