Koden CVS-705D, Installation Manual

Page: 62 / 74

Chapter 2 Adjustment CVS-705D/707D
2-4 0092607052-03
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.
5. Press [ ].
The setup box of [Beam Angle] will be
displayed.
6. Press [▲] or [▼] to set [Beam Angle].
7. Press to close the menu.
TD Setting - HF TD2 Setting
1. Press .
2. Select [TD Setting]
– [HF TD2 Setting].
3. Press [ ] of .
The setup box of [HF TD2 Setting] will be
displayed.
4. Set as the same way as [HF TD1 Setting].
5. Press to close the menu.
2.3.2 Setup of Beam Angle for low
frequency transducer
TD Setting - LF TD1 Setting
1. Press .
2. Select [TD Setting]
– [LF TD1 Setting].
3. Press [ ] of .
The setup box of [LF TD1 Setting] will be
displayed.
4. Set as the same way as [HF TD1 Setting].
5. Press to close the menu.
TD Setting - LF TD2 Setting
1. Press .
2. Select [TD Setting]
– [LF TD2 Setting].
3. Press [ ] of .
The setup box of [LF TD2 Setting] will be
displayed.
4. Set as the same way as [HF TD1 Setting].
5. Press to close the menu.
2.4 Setup of Bottom Limit
If the Bottom Limit is designated, the depth
shallower than the designated water depth is
not detected as sea bottom.
2.4.1 Setup of Bottom Limit HF
TD Setting
–Bottom Limit HF
To set Bottom Limit of high frequency.
1. Press .
2. Select [TD Setting] - [Bottom Limit HF].
3. Press [ ] of .
The setup box of [Bottom Limit HF] will be
displayed.
Caution: The setup of beam angle is
reflected on the display of
detecting range and will not
change the actual beam angle.